Tag Archives: white dwarf

Tabletop War-Game Terrain & Scenery: Getting your Hands on the Materials

Over the last few weeks I’ve been offering tips, hints and advice on creating tabletop terrain for wargames such as Warhammer Age of Sigmar, Warhammer 40K and Skirmish-style games such as Frostgrave. The feedback, comments and notifications I’ve received have had an underlying theme; where do you get your supplies from in the UK?

Being in the UK, many of the materials we see used online do not seem to be available to us. So, I’ve decided to create a comprehensive list of the tools, materials and where I sourced them from. This should hopefully give you a better idea of what you’re looking for and how to get hold of them.

Here goes…

Tools of the Trade

Knives, Blades & Cutting Mats

I’m not going to go into too much detail here as, chances are, you know where to buy crafting knives. The places I think do reasonably priced craft knives are places like The Range, Wilko (Wilkinson’s) and the like (some of these places are relatively new to the north-west UK). That said, some hobby and craft supply stores do tend to charge an arm and a leg for their products, so shop around. I’ve often found supermarkets can surprise you with some cheap, good quality craft knives. A couple of GBP should get you something sensible

Wilkinson’s do a good range of affordable tools, disposable knives being one of them.

The same can apply for cutting mats. I tend to get the SpaceFly brand because they’re cheap, available all over the place and come in a range of sizes and colours. The best place for cutting mats? I actually find Amazon works best. Try to avoid the rotary cutting mats – they’re thinner and not as robust. In my experience, they tend to slip about too.

Hot-wire Cutters

If you want to be cutting bricks from foam or saving yourself from buying a tonne of extra blades, then a hot wire cutter is something you should consider. There’s two thoughts I have on this; cheap is fine, expensive isn’t necessary.

I started with a cheap, basic, hand made hot wire cutter from eBay which set me back about £35. It does the job and you get what you pay for. If you’re flashing cash, you could go for the Proxxon version but in reality, you don’t need to. I upgraded recently to a hot-wire cutter made in China and sold in the UK, from eBay which set me back just over £60. It comes with an pretty accurate set of measuring points, the wire doesn’t flex too much and is held in place neatly. It also cuts faster by having a hotter wire.

Paints, Inks, Washes & Brushes

Again, there’s not much point in going into detail here. If you’re making terrain you don’t need to buy expensive paints. So long as they’re acrylic and mat finish paints, you can buy the cheapest you can find. Art shops are a good place to go, but they will stock more expensive brands, so again, try shops like Wilkinson, the Range and Hobby Craft.

The same applies for brushes. For finer detail paints or highlighting you want a medium sized and soft brush. For mass painting or large areas or slapping on paints and sealers like Mod Podge, a large coarse brush is fine. You can usually get sets with a good variety. Same rules apply; you can buy expensive or cheap, the difference is that one you will replace more frequently but that’s perfectly natural for paint brushes.

More on washes later…

Glue & Glue Guns

Mini glue guns are best. You can get them for less than £5 and the glue sticks online, especially eBay, are sold by the 100 for a couple of GBP. You can go a little more up market here if you have the budget – cheap glue guns will tend to dribble  the hot glue between uses unless you turn it off and on again (which takes time to heat up, so I tend to leave them on as I work).

With PVA glue – the price reflects the water content. Expensive means thicker and stronger, cheap means more water but likely quicker to dry and easier to paint on. Again, buy what you can afford, but for the terrain making, you can buy the cheap stuff and no one will ever know! The great thing about PVA glue is that you can thin it down with water (which for the most part, is free).

Foam, XPS & Styrofoam

The crux of this article. Let’s get something straight. In the US & Canada, XPS foam comes in pink or blue colours and is readily available in large quantities. In the UK however, it seems to be nowhere. That is because over here in the UK we call XPS foam, Styrofoam. XPS is the abbreviation for Extruded Polystyrene – it is basically a very strong, durable but craftable foam which does not bend. EPS, which is expanded polystyrene is the stuff that your electrical goods get boxed in, the white stuff which looks like it has been made out of thousands of tiny bubbles.

Styrofoam / XPS is available mostly online through eBay. I tend to use the supplier named Blue Foam, found here. Depending on the thickness and sheet size, you can get a reasonable amount of Styrofoam for less than £20. This is the material I commonly buy and use to create bricks and bases for my terrain buildings.

You could buy from a hardware or DIY store but I’ve yet to find it in an affordable or ready to use format. If you have found it, please let me know!

Foamstock, Card & Paper

Foamstock is just a piece of foam front and backed with paper. It’s used to mount photographs amongst other junior school crafts. Again, you can get it just about anywhere but the cheap stuff is fine to use and available in pound shops!

I use card recycled from postal packaging. When you buy a book from Amazon they usually turn up in a thin but sturdy card envelope. This stuff is strong and durable and ideal for detailing terrain miniatures. I use it for cutting roof tiles / shingles.

Paper. It’s just paper!

Measuring Rules

I tend to buy rulers and squares from Wilkinson’s or the Range. You may need to dig deep in store to find them. For £20 you should be able to get good quality steel rulers etc that will last you years. Not bad for a small initial outlay!

The God that is Mod Podge!

Yep, this stuff is amazing. It’s not just a fancy PVA glue. No. It is terrain divinity. It dries with more toughness and water repellent properties than PVA, because it contains resins which act as a sort of easy to use concrete. No terrain made from foam should be made without it!

The best news is that you can now buy it in UK shops readily. I first bought some online, but recently found it cheaper in the Range. Not even Hobby Craft had it in stock last time I checked!

Making Decent Wash…

You’ll notice a lot of people create their own washes for terrain. A wash is a water-thin paint that is applied liberally to a miniature which, as it dries, recedes into the recesses of the model to create shadows. It’s a miracle product!

The problem for terrain crafting is that you need a lot of it, and frankly it can be expensive (looking at you, GW)! So here’s how to make your own – keep in mind, if you buy these products you’ll be able to make litres of wash and you can modify them for varied results…

What you will need:

  • Artist Ink (black and brown usually)
  • Mat Medium (essentially colourless paint)
  • Water (deionised is best)
  • A bottle container or two
  • A smidge of washing up liquid

Now, there are literally hundreds of tutorials online to show you how to make washes, so I’m not going to repeat them here, I will however share a link to a really helpful guy who knows a bit more about painting than I do, meet Luke!

If you’d like to read on the previous articles, you can find them in the links below:

Tabletop War-Game Terrain & Scenery: Bombastic Buildings and Fantastic Features – Creating your Tabletop Battlefield

TABLETOP WAR-GAME TERRAIN & SCENERY: Part two, the basic steps

Tabletop War-Game Terrain & Scenery Part Three: Putting it all Together

If you’re on Facebook or Twitter you can find us in these links, where we post often, so you’ll get notifications if you follow us:

Twitter @FerrisWrites or @TheCConsortium

Facebook page!

In the next few weeks I’ll be looking at making trenches, futuristic and alien terrain pieces (Mars was requested) and possibly upping my painting game!

If you think this article or related articles have been helpful, or if you want to contribute with some knowledge of your own, get in touch and leave or comment or get hold of us on Twitter or Facebook!

TABLETOP WAR-GAME TERRAIN & SCENERY: Part two, the basic steps

Thinking of making your own terrain and scenery for tabletop games? Here’s our take on things, free and easy to use!

Last week we brought you an introduction into making terrain and scenery pieces to your tabletop games like Warhammer Age of Sigmar or Frostgrave. In this article you’ll find a little more detail on the early stages of modelling terrain features, with some images of the pilot projects we have currently underway.

I want to to make it clear that I didn’t plan any of these pieces – no more than just a casual thought and a pencil line went into the design, highlighting the point that planning isn’t everything for small projects like these. It can be fun and highly rewarding if you’re open to learning from the process and as Bob Ross would say, have some happy little accidents.

Our approach should hopefully mean less headaches for you and we hope you will enjoy the fruits of our labour!

Stuff We Used (But can be swapped for similar stuff)

  1. Styrofoam sheets (or polystyrene)
  2. Hot-wire Cutter (optional but very quick and smooth)
  3. Craft Knife (essential)
  4. Rolled / mushed up tin foil (optional)
  5. Hot-Glue gun (or PVA glue if you have more time)
  6. PVA Glue
  7. Mod Podge, matte (Optional but a very good sealer)
  8. Acrylic Paint (Black, Tan, Grey & White)
  9. Grass Flocking, gravel (optional)

Preparing the Base

The Styrofoam sheets were too thick, making the round bases 2 cm high, so I cut them down to 1 cm. This gave twice the number of bases I wanted – a great stockpile for future terrain pieces. I reckon these 1 cm high round bases are still sturdy, more so when we apply the various coats of paint and sealers to them. For bigger projects, I may in the future use MDF board.

However, cutting tall pieces of Styrofoam sheet proved difficult – despite my best efforts to keep the pieces upright,  there was always some flexing which caused a few uneven cuts… check out the damage!

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

I got round this by using some scrunched up foil and rolling / dabbling the foam base with it. This softens edges and adds detail. Be sure to use different parts of the foil so nothing looks uniform – or just get yourself a smooth cutting jig for sheets.

Perfect Bricks Begone!

In the previous article I mentioned that the bricks I cut were too perfect. And probably too big. This time we decided to cut smaller bricks than last time – they look better and if we want to make a curved wall, smaller bricks would leave smaller gaps. If we want to add foundation stones to anything, we could still use the larger bricks in the future.

To begin with, we used our very cheap Ebay purchased hot-wire cutter to make a lot of bricks and some bases out from our Styrofoam sheets. This took a bit of time, but now that there’s a box of ready-to-use bricks, we can focus on building and crafting!

To make life easier, I cut some strips from the sheets of Styrofoam and then simply cut the ends off, 1 cm at a time. With a bit of practice I was pushing 2 strips through the hot wire at a time, creating plenty of bricks in the space of an hour.

With the brick cutting process sorted it’s time to deal with the ‘perfect brick’ problem from the previous project. The best idea the internet had offer was to put those Styrofoam bricks into a tub, throw in some real rocks then seal the lid down tightly and shake for a minute. The result was nicely weathered, pitted and rounded edges on each brick. Perfect!

Preparation

Most of the prep work here is to ensure you can start creating great looking pieces of terrain quickly. If you follow our method, we think you’ll be all set up to get stuck in any time you fancy creating!

  • Cut out many, many 1 x 1 x 2 cm bricks. Don’t worry if they’re slightly out of shape – for ruins or even fresh built walls, a little variety adds some realism to the final product. You can go bigger if you’re after chunky masonry.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

  • Weather the bricks by tossing them into a container with stones as mentioned earlier or you could mush them about a bit with some scrunched up tin foil.
  • Prepare a base – for me a 1 cm thick circular base at about 6 inches diameter (inches because most tabletop war games use inches) was fine. The size is just right for some ruined walls without being a massive piece for the tabletop.
  • Mix paints and glues. We added a healthy dose of black to our Mod Podge, created mixtures of water and PVA and even prepared our flocking for creating moss. Cheap black paint with water will create a very simple and nice shade wash to douse your piece, this will offer depth of detail before you move on to painting it properly.

Now to have a think of what to make: to begin with we marked the base with very light pencil lines. These marked out where the bricks would be placed and glued and kept the bricks to a straight line. If you’re making a curved wall, find something to match the curve you’re after – such as a Pringle tube or a cup and trace around it. It’s probably more important for curved walls to trace the lines in.

So, without further ado, here’s our basic terrain formula. We use this formula to create terrain pieces speedily. Keep in mind that it’s pretty basic, but it should give a good coverage to your materials to enhance their structural strength.

Basic Terrain Formula

Hot glue gun. Glue each brick, one at a time. Give each row a few seconds to cool and harden so you don’t squash previous layers out of line. Build upwards, making sure you alternate the corners and rows – this isn’t just aesthetic, it actually builds a stronger wall!

Water down some PVA, about 60/40 (PVA/Water) and apply it to wherever you want to add gravel. Sprinkle the gravel on and leave it to dry. Drying times will vary. Give it plenty of time as the next layer will mess it up if it isn’t properly dry.

Mod Podge layer comes next. Get it right in the cracks, thin the Mod Podge down a little to get lighter coats and ensure full coverage. You can add a dash of water to the Mod Podge to thin it down. Allow to dry until it darkens all over.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

Water down some cheap black acrylic paint with water, 60/40. Apply it all over! If you’re having trouble getting it into the cracks or its not covering properly you can add a literal drop of washing up liquid. Stir it in, don’t shake it! What you’ve made is essentially a shade wash – the paint will seep into the cracks and impressions, bringing out the detail. Don’t worry if it doesn’t stick to the whole surface, it’s not meant to! Allow to dry.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

Dry brush with successive layers of tans, light browns, greys.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

  • Add any details such as grass, flocking etc.
  • Once you’re happy, give it a nice layer of hard-coat and allow to dry!

That is pretty much the basic formula used to create terrain pieces. It took a few attempts and some rescues in the first 3 pieces I made up, so don’t panic if you jump forward a step or miss a step – you can always go back, and reapply layers again. The important bit is Mod Podge first!

Details, Details, Details…

Weathering Foil

To weather our bricks, we grabbed some stones from outdoors, put them in a tub with a handful of bricks, and shook them about. Alternatively, we also rolled and scrunched up some foil so that it had uneven and sharp edges. Simply foll or dash the foil against the surface of the Styrofoam and you’ll get a stippled patina that looks like weathering.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

Brickwork

When using bricks like this, it pays to get the first layer glued in properly. I lined up the bricks against a light pencil line drawn into the base. This allowed me to keep the brick laying straight, it also allowed me to approach the corners of walls without too much thought: make sure that each corner brick alternates with the row below it. You can see the detail in the images below.

I like to add some random fallen bricks and gaps in the walls to add a bit of life to the ruins… in my head I imagine the story behind them too…

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

Pathing Stones

For pathing stones, I cut some strips of foam 2 x 2 cm and then just cut the ends off about 0.5 cm. Sanding the corners at this point saves doing it for each individual piece later – a nail file or fine sandpaper will do.  I didn’t need a lot of these but I cut more than I required. I think it looks better if the pathing stones are at an angle from the brick work. I traced some guidelines directly onto the foam base to get an idea of where to place them.

Moss (maybe Lichen)

To add moss, mixed PVA with water (75/25) and toss in a load of flocking so there’s a mulch of thin glue and flocking. You can add dashes of colour for a varied effect. With a brush, get a gloop and dab it in the brickwork gaps, hang it from beams etc. When it dries you can always add more. If its thicker, you can make it drip from beams, where, if you’re lucky, it will harden and look like hanging moss. If you’re feeling particularly special, you could add some tiny drops of colour to the dried moss, for flower details.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

Extras

I’ve had an old sprue of assorted items from the original Mordheim game which contains a chest of gold and other bits and pieces. It must be older than some of our readers. I’ll construct, paint and seal these separately, but you can always add them into the formula above to make them look part of (and more involved in) the scenery.

There are a tonne of suppliers online for bits and pieces to add to scenery. Even the expensive GW products come with optional extras on the plastic sprues which you can scatter about for extra detail – weapons, shields, skulls etc. However, if you want to get some extra bits and pieces, I’ve included a link for your perusal later on.

Try some Mantic Terrain Crates

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

What I’ve Learned this Week

  1. It’s been fun!
  2. I realised that the number of happy accidents are more common than first expected. This element of randomness and chaosivity (to quote a theatrical costumer I know) has given me ideas which I’m going to try and emulate – randomness in a brick wall makes things more interesting than a homogeneous perfection.
  3. You can always go back and change something if you make a mistake, cut out bits you don’t like and just make it look like a natural part of the decay. The process we’ve given is very forgiving!

Coming Next…

So I think I’ve mastered the basics of ruined buildings. Now, I’m going to be setting my sights a little higher by building a larger more detailed ruin. I admit, that not putting much planning into this project is going to be a challenge, but also fun and rewarding.

A simple two story, battle ready building with details is going to look cool – here’s a sneak peak!

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

I’m away over the next bank holiday weekend, so I’ll get some steam rolling to bring you even more advice and tips on creating battle field terrain soon.

Good luck, and have fun!

Ferris

Part One…

Part Three…

Twitter @FerrisWrites or @TheCConsortium

Facebook page!

 

BattleScribe: The Only Army List Builder you’ll need for Warhammer 40,000 & Other War games (Opinion)

I first mentioned BattleScribe in this article, briefly and frankly I think it deserves far more than a mere mention. So here it is, my closer look at the free army builder for nearly every war game out there!

I’m a lazy gamer when it comes to war games. Often I forget to bring or just haven’t bought the hard copies of the books that I really do need to play the game. Often I just borrow those belonging to my friends, and more often than not they never see them again for several years as they gather dust.

warhammer 40000 40k fantasy battlescribe army list army builder armylist armybuilder gamesworkshop games workshop

But now, I’ve found something amazing. Something so great that it will blast the dust away from my bookshelf, shoot laser beams from the eyes of my wraithlord and generally add the power of the god-emperor on his relic throne to every aspect of my wargaming.

I’m talking about BattleScribe and I’m talking about Games Workshop’s Warhammer 40,000.

I’ll point out that BattleScribe doesn’t just do Warhammer and Warhammer 40,000 stuff. It covers just about every war game currently out there. The data is maintained by the community, so it’s fairly balanced and as far as we can tell, canon (if that’s even possible for anything Games Workshop?)

Just a few games that jump up as popular, to give you an idea of the coverage:

  • A song of Ice & fire: Tabletop Miniature Game (which I kickstarted but yet to play)
  • AvP: Unleashed
  • Battletech
  • Bolt Action
  • Star Wars Armada, X-Wing & Legion
  • Firestorm
  • Fantasy Battles (the 9th Age guys!)
  • Infinity
  • Halo games
  • Harry potter games
  • Warmachine Hordes
  • Warhammer – all of it, from just about every age and era!

There’s something for just about everyone.

Now, I can’t say that I’ve used much in the way of similar programs, but the ones I have seen are poorly maintained, have hidden pay schemes for some or all content or just don’t have the scope to cover everything war gaming.

But BattleScribe has it all. I’m just getting started. Can you tell?

Features

I lied a bit – there are parts of BattleScribe that you can pay for. But this really doesn’t diminish the value of the program if you use only the free version. I think that after a couple of uses you may be tempted to even throw some spare money their way as a thanks for making your life much easier.

Pros

  • I’m terrible at flicking through the book and understanding how armies come together, detachments and points values, layers of this and that, the colour of the banner under a martian moon, etc. This feisty little program does all that for me – it even tells me if there’s something missing, if I’ve over spent on points, how many command points I have, what I need to eat for breakfast the week before (actually, my mother does that but she’s just as thorough too).
  • You want that list but can’t stand squinting at a screen like a cyberpunk mole? Yeah me too – BattleScribe can export your files as text and HTML. I believe the phone app for android also does PDF. So you can print out your army list, with options for including rules, points values etc.
  • You can share the data using URLs and they can be linked to Dropbox – I don’t ever have to pack a book ever again!
  • You can use BattleScribe on just about any modern platform, from desktops to phones, all makes, and versions.
  • Finally, according to their website you can update and edit files if you spot mistakes.

Cons

  • Using the Android App, it can be a bit fiddly when you first use it, and it does take a little bit of time to learn how it functions and how to edit your choices, such as war gear, detachments and commanders etc. Once you pick this up, and it is fairly intuitive, you’ll be fine. I still didn’t fully understand army detachments and specialist forces, so it took a bit of extra reading – it won’t tell you what things actually are until you select them, then it tells you what is missing. It was a bit of trial and error on coffee break.
  • The data files are community driven – there’s a tonne of slimy teenagers and Dorito dusted nerds out there who may want to fudge the rules a little bit. Those errors you friend found… yeah they may have just been a few tweeks to fit the “theme” of their army.

There are extra features for paying customers, mostly nice fluffy stuff like saving and customising units with names, quick views, some dice tools for when you don’t have any dice or math skills and of course, removing adverts, which I have to say, always sounds worth it.

So what does it all look like?

Well I had a bit of a fiddle and worked an army list which I think is legal, according to BattleScribe.

Here is an example of the output from PDF form, as you can see it lists everything I need to know about the unit. Other than a copy of the rules (which are brief now, thanks to GW’s overhaul) I’m covered.

BattleScribe Example Wraith Lord

You’ll notice that some of the Characteristics are labelled “Characteristic 1” etc. These follow a logical order of the stat line. It’s not really a bad point or a con, but worth mentioning in case you don’t realise in a rush.

The overall PDF has each unit nicely sectioned to set pages, so there’s very little run over. I suspect for something really powerful, like, I dunno, a Chaos character (?) the list may go on for quite a bit, but you’ll have to play around.

Here’s the whole PDF for you to look at. It’s not my final list, but I guess it’s pretty close!

Wraithhost Spearhead (HTML)

warhammer 40000 40k fantasy battlescribe army list army builder armylist armybuilder gamesworkshop games workshop

Finally, the link you’ve all been waiting for for BattleScribe.

So there you have it! Let me know what you think about the BattleScribe and maybe pass them a little donation if you like the work they’ve done!

J.D. Ferris, CC

Join our growing mailing list here.

Title Art taken from Warhammer Art (I bought a copy) – you can find the poster for sale here.

Forge World: My first Experience with the Specialist Supplier for Games Workshop – The Craftworld Aeldari Wraithseer Model

download

Most of us have seen or heard of Forge World. If you have, you’ve likely stared in disbelief at the prices of some of the miniatures they supply – even compared to Games Workshop – a notorious money snatcher – the prices are pretty high.

But are we getting upset by the price for no reason?

I’ve been gaming for years but I’ve never actually looked into Forge World before. I’ve heard many things, but as a scientist and forensic student, I would not be doing myself any favours without investigating the facts myself.

So, here goes.

My current Project…

I’ve been looking for a nice centerpiece miniature model for this new collection, which had to fit the theme of the faction and the type of army I was hoping to create. Since most of the troops I’ve selected are essentially ghosts and spirits animating some (very cool) looking suits of armour, some random space elf dude wasn’t going to live up to the aesthetic. So I looked around – and stumbled upon a new miniature I haven’t seen before… the Wraithseer. But, oh no, you can’t buy this miniature from Games Workshop, no. You have to order it from Forge World. Hmm… there’s a risk there, I’m sure.

99590104063_EldarWaithseer05

So I’ve looked into Forge World and I placed an order. I started to put this centerpiece commander together. These are my experiences and conclusions about the quality and worthiness of models bought from Forge World.

You’re gonna get some background on Forge World and I’ll throw in some images of how I went about the process of opening the box and putting it all together. Then I’m going to tell you if I think Forge World are worth it.

But First, some Background

Who the hell are Forge world? Forge World are a supplier of specialists model miniatures and conversion kits as well as specialist games. They generally use a type of resin for their products which is different from normal plastic. You’ll find they make all sorts of wondrous miniatures.

And to be perfectly clear, they are Games Workshop through and through. Same company. Same HQ. Same offices and same website design.

Games Workshop are a UK miniature war-gaming manufacturer. They are best known for their tabletop war-games such as; Warhammer Age of Sigmar (Fantasy Battle), Warhammer 40,000 and The Middle Earth Strategy Battle Game.

There’s a tonne of controversy with Games workshop and its various branch-off businesses, mainly; the pricing of their products, the way in which their new products are generally more powerful than the current stuff and the way in which they imply everything for Games Workshop has to be gold plated to be used. But despite all this, they generally do make some really good miniatures, to a good standard of quality. But if you ask the internet, they hate their customer base. I’m sitting on the fence of absolutes here – I enjoy the stuff they create, but I kind of agree that they are generally over priced.

My First Order from Forge World

Since May I’ve been an adult and started collecting miniatures from Games Workshop to play one of their main game lines, Warhammer 40K. Since childhood I enjoyed the setting and themes of GW’s universe, but I never really understood the concepts of some of the factions (armies) that are available for play. So, since I’ve had a little more free time in the evenings I started to collect miniatures for a faction known as the Aeldari (formerly, the Eldar). Think space-elves are you’re pretty much there. These guys captured my imagination from an early age and it’s taken me over two decades to start collecting them.

This is what I purchased, the Wraithseer, a variant of the Wraithlord.

 

Here’s what I found with my first experience with Forge World:

You essentially get a normal product with extra components to create the specialist unit. Since the Wraithseer is a Wraith Lord, you get all the parts for the Wraith Lord, with some extra bits to make the model into the Wraithseer. GW’s Wraithlord = £28, FW’s Wraithseer = £41. I’m spending £13 on some extra bits. Is that too pricey? Well, we’ll look at the quality later and draw some conclusions.

20190209_11213920190209_112230

The extra components are a different quality resin, lighter grey and more pliable. In the past, this resin was labelled as ‘Fine cast’ which suggested that the detailing on each model was of superior quality. It turns out, that wasn’t the case, so they ditched that marketing and decided to refer to the new range of products as simply, resin.

Edit (17/2/19, 17:30 GMT) – The above stricken text was later found to be incorrect. There is supposedly no link between Fine Cast and Forge World. However, this does not mean that GW dropped Finecast completely, as I’m sure there was overlap at some point between the manufacture. I’m open for more comments on this, so feel free to educate me!

Accurate-Finecast

Was anything bent out of shape or wildly irregular that it will not work? No, apart from a slightly wavy long narrow spear shaft, this model seems fine.

What did I have to do that was different to preparing a regular plastic miniature?

There’s a lot more flash (excessive build up of plastic / resin which you don’t normally get from the regular plastic kits) that needs cleaning and cutting away. If, like me, you’re haven’t done this sort of thing for years, you’ll really need to take your time and go slow. Look at, and think about, what you’re going to cut and how you’re going to cut it – these kits are expensive and you don’t want to mess it up! They’re also much softer, so any cutting risks cutting too deep! Resin kits need super glue to bond efficiently too, and they bond fast!

Bubbles

The Resin components: How does it look and feel, is the detail any better?

Hmm… yes I think it is. Some of that detail may be lost in the excess resin flash though. It certainly seems crisper in some places, but on areas of the blades, such as this cool looking spear, I had to re-carve the back of the blade so it looked less like a portion of cheese left to rot in Nurgle’s undercarriage. And check out some of those random bubble holes still!

20190210_120914

It glues and sticks fast. Really handy when you’re relying on your heartbeat to not force your fingers to break the delicate bonds using a more brittle and fragile plastic.

It is more pliable. It feels smooth and clean, but there is a bubbling effect in areas which will require more modelling to fill in the gaps. More time required, I guess!

How hard was the model kit to assemble?

Actually, not too hard at all compared to the regular wraith lord (of which, I’ve made three since May). Some of the components are very small and fiddly but if you plan the assembly properly, you shouldn’t have any problems at all!

 

Am I happy with the product?

Yeah, I think I am, but let’s discuss some final thoughts. I did realise later on however that the bases provided for the Wraithlords are scenic, they have nice detail touches like cracked earth and debris. There is no such base for the more expensive Wraithseer. What’s that all about? Well, it’s either money, or laziness on the part of GW’s package planning.

Final Thoughts: Is Forge world worth it?

I think this all depends on the buyer:

If like me, you’re a regular war-gamer with limited funds, then I suspect Forge world products are not for you – simply put, you don’t need them to enjoy the tabletop war games produced by Games workshop.

If your sole attraction to miniatures is to assemble, convert and paint models, then actually yeah, I think it’s for you – I suspect you’ll buy one-off miniatures, paint them to a really high standard and marvel at them in a highly polished glass case. Or sell them on Ebay for a little bit of extra money.

Forge World is not for kids. They’re out-priced for a start – unless you have wealthy middle class parents, but also because they’re not recommended for anyone under the age of 15. Why? Well they’re fiddly, require you to use sharp points and blades… and apparently the resin is toxic as a dust. Perhaps most teenagers probably won’t know how to assemble the over priced miniature too – there’s no instructions provided!

Edit (14/2/19, 21:00 GMT) – Many of you have praised the customer services of Forge World. Apparently they are more than happy to offer replacement parts should your model not be usable, or even if any of its components are not usable. So much so, no one I’ve spoken can fault them for it. Seems they actually care!

And finally – you can’t buy the rules for these models or download them separately like you can for some products on the GW website. No, you need to buy a separate book for about £15.

HOWEVER – I have recently discovered a very cool app called BattleScribe.

BattleScribe is a free army builder app for Warhammer 40,000. It contains everything, which means you don’t need to have any of the books for any of the Warhammer 40K factions and this app even lets you download your selected army as an easy-print PDF with ALL the rules associated with the models and the choices you made for the army.

Yes, it is FREE.

So there you go – it is unlikely I’ll be buying anything else from Forge World in the near future (unless I come into a large amount of prize money for something). But if you’re a collector of interesting miniatures or if you like a challenge, then its good for you.

I’d like to hear your views and opinions on Forge World and their product line, so feel free to add a comment or message us. You can join our slowly building mailing list here.

J.D. Ferris

Warhammer Quest Blackstone Fortress: One Stronghold Down & Still Learning

Prior to the Festive period we got our hands on a box of Games Workshop’s Warhammer Quest: Blackstone Fortress. So far we’ve been loving the game. Some of us have had reservations about Games Workshop in the past, their ability to piss their hardcore fans off – which seems to be normal for any company in the 21st Century, but more so because of the blatant greed. I digress, I actually enjoy the Warhammer and Warhammer 40K universe.

Over the festive period we’ve managed to get in three solid gaming sessions; the first to get to know the game and try to figure out the rules; another to start a proper campaign and see how far we could get; and the most recent session to take on the first of several strongholds in the game. Allow me to explain…

In Warhammer Quest: Blackstone Fortress you play characters from a band of adventurers in the 41st Millenium, investigating an ancient and monolithic structure drifting in space. Access points to this fortress allow you to gain entry into different parts of the fortress, where you seek clues to find the much sought after Hidden Vault.

warhammer quest blackstone fortress games workshop

In game terms you need to find clue cards from your expeditions into the Blackstone Fortress. At first glance we thought this could take a good number of games, and now after a few more sessions we have a better understanding…

In session 2 we ploughed our way through a regular expedition, taking some heavy fire but actually finding a total of 5 clues, 1 more than we actually needed. This allowed us to gather the information and put it together into locating one of several strongholds which held a higher echelon of clues, to eventually permit us deeper into the fortress (we guess). So in actual fact, we don’t need to play hundreds of games as we at first thought. No, you can get all the clues you need in a single nights session of gaming.

So in session 3 we blitzed the run-up to this stronghold, the Descent, where the players must traverse a two layered dungeon map (sorry, Combat map) and then get to a focus point and access it several times to end the game. Whilst this was happening, the monsters and bad guys were spawning 50% of the time, because reinforcements in Strongholds happens on a 1-10 of a 20 sided dice.

But we cheated..!

Ok, so we had 6 players this time round (usually its 4 characters tops), so it was much easier. But in our defence, we still nearly lost several characters in the process which would have crippled our chances of completing the game as a whole and never opening that secret envelope for the Hidden Vault.

warhammer quest blackstone fortress games workshop
Mmm, secrets…

So, to the naysayers on reddit who told me that the price of the game (even discounted to ~£70) was not worth it because, on average, people would maybe play the game 4-5 times a year: your loss. Even if you hate Games Workshop for being the money making powerhouse that it is, they’ve actually hit upon a good game, that has more depth and story than any of the current or previous games they’ve made.

You see, the game relies on players not always being present every gaming session, so that the characters they play, which are persistent throughout the gaming sessions, get played by other members of your gaming group. If that character dies, there’s no chance of them coming back, they lose all of their equipment, focus and abilities not only of themselves, but of the adventuring group. That adds up to quite a loss.

Why is this a good thing?

Because it adds a sense of realism and makes the game harder challenging.

We’ve felt challenged by this game each session, more so because there is no genius mastermind controlling the bad guys. Cooperatively, we were still getting our buns handed to us by an insubstantial  entity that is the games master.

A bit like a omnipresent  entity in the form of a floating space fortress…

Our advice for the average gamers with families (thus limiting your game time) – play Warhammer Quest: Blackstone Fortress with less  Exploration Cards. Normally you create the deck of Exploration cards by taking 4 from the challenges and 4 from the Combat decks. This, in our opinion, can take more hours than are fair in an evening.

Three cards from each can take you 3 hours, you just get less chance of finding clue cards, but then you just play an extra session later. It’s pretty straight forward!

Let’s see if we can get that envelope opened!

Warhammer Quest, Blackstone Fortress – Hero Quest in Space or More?

Blackstone Fortress is the latest adventure board game to come from Games Workshop set in the grim darkness of the 41st millennium, Warhammer 40K to most nerds. It is labelled as Warhammer Quest. For those you in your thirties this will take you back to the glory days of heroic ineptitude – the golden age of adventure. For everyone else, it’s the latest in the Warhammer Quest Series. Alongside Blackstone Fortress in the Warhammer Quest series are Silver Tower (currently discontinued) and Shadows of Hammerhal both of which are set in GW’s fantasy setting, Age of Sigmar. All of these games follow similar game styles and mechanics, so if you’ve played one you should be able to pick up the others with relative ease.

Blackstone Fortress promises exploration and adventure in the grim darkness of the 41st Millenium, a vast void of horror and terror.

It delivers.

With character choices ranging from outlawed Artificial Intelligence robot, rogue trader and Imperial Navigator to fanatic, Ratling snipers (who are twins) and alien hunters, there should be something for anyone who has an interest in grim and gritty science fiction.

A few of you older players out there who have not ventured in table top adventure games in some time may be thinking ‘is this just Hero Quest in the modern era of gaming?’ I think it’s a fair and realistic question. So is it just Hero Quest in space? Well yes, at least in concept.

The Goal

The whole point of Blackstone Fortress is to find your way into the Hidden Vault, deep inside the drifting hulk of the mysterious Blackstone Fortress. To do this, players need to discover clues during their expeditions. These clues will lead to special scenarios called Strongholds, which will eventually lead to the hidden vault. Even when a stronghold attack can be mounted, the players still need to get to them, with a 4 card expedition, purely of combat – more of this later. Getting to the hidden vault will take a lot of gaming hours, but I am certain that it will be a challenge and a worthy one at that!

In the game fluff, the Blackstone Fortress learns and adapts after each incursion of adventurers. Legacy cards add to the danger in this aspect, increasing the threat level for some monsters, such as the Spindle Drone. They up the ante during the expeditions. Once in play they stay and generally add flair and layers of danger to the expeditions. Once there are no more legacy cards in left in play, you’ve run out of time, and lose the game, no matter where you’re up to!

warhammer blackstone fortress sci-fi horror gamesworkshop
The Precipice section of the board game, from Games Workshop’s Blackstone Fortress, with the character ships, two varieties of the Grav-lifts and the Leader token.

Let’s take a look at the goods first though…

Manufacturing Quality

The important bit to most gamers and war-gamers: are the miniatures any good? Yes. The miniatures are amazing and better still, they clip together – no glue required. You just need something to cut them from the plastic sprue. This took me a couple of hours whilst watching a series on Netflix so anyone with more experience may get it done in half that time.

The miniatures are constructed in such a way that they appear seamless, which took a bit of jigsaw magic to see how they fitted together – but as previously mentioned, no glue is required, so you can take your time. The same great GW quality of miniature manufacture is found throughout. I think my Kill Team just got bigger too – the models are in hot demand, check out ebay if you don’t believe me.

The game tiles are a really thick and good quality card. They pop out easily, which reduces tearing of the precious printed sides. They’re double sided but unlike Imperial Assault by Fantasy Flight, there’s not a million small pieces to get lost or confused with. The game counters are all pretty unique, with the majority of them being wound tokens (which are double sided for critical wounds). The rest are for game effects and inspiration points, which I’ll mention later on.

There are three rule-books.

Don’t despair.

warhammer blackstone fortress sci-fi horror gamesworkshop Games Workshop
Five books from Games Workshop’s Blackstone Fortress. One is fluff, one of rules for Warhammer 40K and the other three are for game play.

Each one is written chronologically for each section of the game as you progress. They are written to the usual standard for GW, guiding you through in simple steps. The terminology may be a little different if you haven’t tried GW games before, so take your time. If you are familiar with any of the GW games, such as Warhammer 40K or Age of Sigmar, you’ll find the turn sequence and rounds familiar.

Once you have the turn sequence in your mind, it’s pretty straight forward from there. There is a bit of juggling with the game on the first play through, as you consult different books to figure out when you can heal or how to carry out certain actions. This is a minor point, however it does highlight the importance of reading through the rules before the gaming session!

Blackstone Fortress is split into two game sections by exploration cards; challenges and combats, which are drawn randomly from the Exploration card deck. The exploration deck is large, 36 cards, so it should always be a different combination. You randomly pick 4 challenge cards and 4 combat cards which make up the Exploration deck for the Expedition. When combined, these are like a campaign story arc. These are shuffled and placed on the Precipice board, which is like the character staging area.

There are 18 cards each for both challenges and combats (36 cards in total). By drawing 4 of each randomly, you’re looking at 1 in 18 chance of drawing the same cards each time you create the exploration deck. The chances of drawing the same 8 cards are something like a 1 in 105,000 chance, by my shoddy calculations. That’s a lot of gaming before statistically you get the same play-through.

Challenges

The challenges are narrative encounters which do not make use of models and board pieces. They are usually a way of grabbing gear and tech (treasure, clues to future explorations), usually by causing damage to assailants. They include short narrative pieces such as ‘Get them all!’ where the players are required to inflict as much damage as they can to a fleeing group of hostiles – anyone who can deal 4 or more wound gets to draw a card from the discovery deck. Simples.

On a balancing note, these may be to help characters build up with less risk than combats or offer special cards for future explorations.

warhammer blackstone fortress sci-fi horror gamesworkshop
The Precipice section of the board game, from Games Workshop’s Blackstone Fortress, with two of the character ships, the Destiny dice, Exploration cards and Discovery cards.

Combat Setup

Combats involve board pieces and miniatures and are the biggest portion of the game. Each combat exploration card shows how the map tiles are set up so anyone can setup the board while others are chasing through the rules books or determine where the bad guys and monsters are placed. They also mark where certain mission specific specials may be placed.

Keeping track of the game during combat is achieved with the Initiative tracker. The players get the option to attempt to help each other by swapping places with allies or attempting to swap their place with the enemy to get the drop on them. This all happens in the Initiative phase, followed by the Gambit phase. The Gambit phase can be costly as an action dice has to be spent, followed by an ability roll to determine success. These mechanics help to really bring the tension to the game, forcing the players to plan ahead. The players feel the pressure when the cards are redrawn each round, as their plans will likely need to change.

Hostiles and bad guys are drawn from the Encounter cards deck and placed in the starting positions according to the combat exploration card, which are given a specific place on the board and the tracker. The number of hostiles on a card are determined by where on the tracker they are, for example, you may get 2 drones on position 1, or 4 on position 2. Hostiles gain reinforcements each turn and are spawned on their turn in the Initiative track with a roll of a 20 sided dice, called the Blackstone Dice (which is black and looks like a stone if you’re not familiar with 20 sided dice). This adds threat, because even if all the bad guys are dead, they can keep re-spawning as happened with our test games!

warhammer blackstone fortress sci-fi horror gamesworkshop
The Traitor Guardsmen for Warhammer Quest: Blackstone Fortress by Games Workshop

Hostiles in the game are given over to an AI system, where they react depending on a dice roll. It is not completely random, as each action they are given depends on a set few variables which allows them to act organically. Each set of rules for the monsters appears on very handy cards, giving you everything you need to know in a single place. So much easier than consulting multiple books!

warhammer blackstone fortress sci-fi horror gamesworkshop
The Traitor Guardsmen for Warhammer Quest: Blackstone Fortress by Games Workshop. The reverse side shows how the AI results on a dice roll.

Hostiles are terrifying in their own specific ways; if they’re not ripping you to ribbons with frenzied claw attacks they’re punching through your armour and ignoring your save rolls with shocking power! Case in point, UR-025 (or Mr Robot man to you and I) is a heavy duty fighter, with a better chance of rolling saves against wounds, with an added re-roll too – then he gets hit by a Negavolt Cultist and suddenly he has no armour saves. Surprises await those unprepared!

warhammer blackstone fortress sci-fi horror gamesworkshop
Game tiles for Games Workshops Blackstone Fortress. Double sided and durable for all your grim and gritty science fiction adventures in the hopeless voids of Warhammer 40K!

Characters in the Game

At the start of each combat round Characters are allocated action dice, regular six sided dice. The dice are stored on their character card with whatever score they rolled. These dice are used / spent on actions which require a set number on one or more of those dice. Moving require a dice with a score of 1 or more, other actions may require 4 or more on a dice etc. There are standard actions and character specific actions, which are found on the character cards, usually weapon actions.

Explore with caution. When you are wounded the dice you roll at the start of each round are blocked, covered by wound markers, meaning the potential number of actions you can make are severely impaired! Fear not however, each round an extra pool of destiny dice are rolled which any one can use – but the power of the warp means that any duplicate scores on these dice are removed, so you better roll fresh to get the most out of destiny! A lot of dice multiples came up during our game, causing tension and nail biting in equal measure.

A second type of dice rolls are attribute dice which are used to evade damage, carry out special tasks and try to recover wounds. There are wounds and then there are critical wounds – wounds can be recovered during the combat part of the game, whereas critical wounds require a trip back to your ship to try and heal. As with Warhammer Quest back in the golden age, however, there’s always a chance something may not heal fully…

warhammer blackstone fortress sci-fi horror gamesworkshop
The Kroot Tracker for Warhammer Quest: Blackstone Fortress by Games Workshop

The dice rolls are easy to interpret: you either fail, succeed or critically succeed. Each of the ability dice (6, 8 and 12 sided dice) are colour coded to match the information on the character sheets. These dice rolls are not always friendly, you can feel like the end of times can result from a failed roll. On the plus side, there’s very few calculations as in some GW games – just check to see how many symbols you rolled and away you go. GW have followed Fantasy Flight in this – so don’t lose those dice! Otherwise you could end up paying for more specialist dice in the future…

Toward the end of the combat sections, characters need to escape by summoning the escape lift, usually under duress. There’s no way out otherwise! When the remaining characters get to the escape lift, they have to decide to carry on fighting the growing horde, or to head back to their ships to lick their wounds. Heading back restarts the exploration so if you really need to finish you’re gonna find it hard to do!

When a character kills a number of monsters on their turn, they can roll the Blackstone Dice to see if they gain Inspiration points, where they are required to roll under the wounds they caused on a 20-sided dice. Inspiration points are used to re-roll some dice throughout the game, usually the activation dice at the start of the round, or give flip your character card over to increase their effectiveness. A bit like leveling up!

warhammer blackstone fortress sci-fi horror gamesworkshop
The ‘Inspired’ Kroot Tracker for Warhammer Quest: Blackstone Fortress by Games Workshop

At the end of each round of the game, in combat or otherwise, a leadership token passes around the table, allowing each player to call the shots in equal measure (with a discussion, of course).

First Impressions & Thoughts

In a single evening gaming session, including learning how to play the game, we managed to get through 1 challenge and 2 combats. Assuming we don’t have to relearn the game, we could probably manage drawing 4 of the Exploration cards, which equates to half an Expedition. At this rate, in theory, we could spend hundreds of hours playing this game. So unlike Hero Quest, there is a seemingly limitless combination of events from challenges, combats and encounter (monster) cards. There’s probably scope for fan made or self made encounters too, let’s watch the internet pensively for these.

The game has a very nostalgic feel to it, similar to previous board games from GW decades ago. The hostile creatures are just as deadly as you’d expect, in their own ways. Players without prior knowledge will make mistakes which make the game intense and ups the challenge rating greatly. In this way, very much like Hero Quest!

The open form and random generation of each Expedition is a similar mechanic used by other games and it works just as well in Blackstone Fortress. It will take some serious play testing to get through all of the different combinations. In our initial play-through we had four players and one person acting as the games master. We felt this worked best for our first game so we could focus on the different parts of the game – just like in Hero Quest! You can play this game solo or without a games master, as the monsters follow an AI system, meaning all you need to do is move the pieces around and roll the dice.

warhammer blackstone fortress sci-fi horror gamesworkshop
Dice, lots of six-sided dice, with the special ability dice, from 6, 8 & 12-sided dice. The 20-sided dice is the Blackstone dice…

What we did wrong…

We went wrong in some parts, missing the exploration round which would have made the combat a little easier if we had rolled on the event table. Although, the table isn’t all good – sometimes it can go horribly wrong… So it’s not all bad!

Why did we miss this section? It’s right at the end of the combat book, and there’s a lot in some sections. As we frenziedly played through the rounds we completely missed it! No one said nerds were thorough. So be sure to have all books to hand and refer to them often.

Value Ratio

It is a thorough and playable game. It has the same high quality of most Games Workshop products, but you will pay through the nose for it if you don’t shop around. I was lucky, I found an ebay seller with about 20% off the RRP, I then applied a free 10% discount from ebay to get it even cheaper.

If bought from a third party retailer the price becomes a little more affordable for a game of this type. The miniatures are worth a heavy bit of gold. The card tiles are sturdy. Even the box is sturdy (I mean, it has to be, it’s a heavy one). You get all the dice you need.

Edit: This may look like a silly thing to say, but £95 is a hefty price tag for any board game. Shop around, GW will get their money, so it helps smaller businesses if you go through them!

Since this is a complete game (£95.00), there’s no expansions as far as we know, and given the replay ability of expeditions is very high, it is feasible to play over a hundred games. Maybe even twice that. So you’re looking at about £0.5 – £1 per game. Let’s be conservative and say each full expedition takes 4 hours. You’re looking at £0.25 to £0.50 per hour of play. That’s really good money for a game that should be different each time. You’re snacks will cost you more to eat!

In Conclusion

The Feels – a dark, desperate setting with mechanics that fit those feelings. Thrilling, because when you do score a critical roll it feels like the cosmos is backing you up – any other time it’s trying to eat you!

No silly measuring distances, just count the hexes. Can you draw a straight line from the centre of a hex to the hex your target is standing in? Then you have line of sight, roll your dice. It’s that easy.

Edit: Downsides include what some players have described as ‘chaff’ play. This means that a few players think the amount of combats that are required to complete the game can get a bit samey. GW, do we need to go through quite so much to complete the game? On a personal level, I think it’s important to understand that the fighting during the combat sections are not about clearing the board – it is about surviving the battle and gathering the clues before time runs out. Perhaps GW could do with giving us more information on the bigger picture of the game earlier on.

So is it like Hero Quest? Yeah I think it is, it certainly has that heroic quality to it, and I’m sure it will one day be one of those nostalgic games we all reminisce about.

If you’ve got any questions or thoughts, we’d love to hear them! you can find us on our discord server.

You can get a few more articles by us on other Games Workshop products here or here.

Enjoy!

 

*Edited 24/12/18 to reflect some feedback from our gaming group and affiliates.