Tag Archives: War

Tabletop War-Game Terrain & Scenery: Getting your Hands on the Materials

Over the last few weeks I’ve been offering tips, hints and advice on creating tabletop terrain for wargames such as Warhammer Age of Sigmar, Warhammer 40K and Skirmish-style games such as Frostgrave. The feedback, comments and notifications I’ve received have had an underlying theme; where do you get your supplies from in the UK?

Being in the UK, many of the materials we see used online do not seem to be available to us. So, I’ve decided to create a comprehensive list of the tools, materials and where I sourced them from. This should hopefully give you a better idea of what you’re looking for and how to get hold of them.

Here goes…

Tools of the Trade

Knives, Blades & Cutting Mats

I’m not going to go into too much detail here as, chances are, you know where to buy crafting knives. The places I think do reasonably priced craft knives are places like The Range, Wilko (Wilkinson’s) and the like (some of these places are relatively new to the north-west UK). That said, some hobby and craft supply stores do tend to charge an arm and a leg for their products, so shop around. I’ve often found supermarkets can surprise you with some cheap, good quality craft knives. A couple of GBP should get you something sensible

Wilkinson’s do a good range of affordable tools, disposable knives being one of them.

The same can apply for cutting mats. I tend to get the SpaceFly brand because they’re cheap, available all over the place and come in a range of sizes and colours. The best place for cutting mats? I actually find Amazon works best. Try to avoid the rotary cutting mats – they’re thinner and not as robust. In my experience, they tend to slip about too.

Hot-wire Cutters

If you want to be cutting bricks from foam or saving yourself from buying a tonne of extra blades, then a hot wire cutter is something you should consider. There’s two thoughts I have on this; cheap is fine, expensive isn’t necessary.

I started with a cheap, basic, hand made hot wire cutter from eBay which set me back about £35. It does the job and you get what you pay for. If you’re flashing cash, you could go for the Proxxon version but in reality, you don’t need to. I upgraded recently to a hot-wire cutter made in China and sold in the UK, from eBay which set me back just over £60. It comes with an pretty accurate set of measuring points, the wire doesn’t flex too much and is held in place neatly. It also cuts faster by having a hotter wire.

Paints, Inks, Washes & Brushes

Again, there’s not much point in going into detail here. If you’re making terrain you don’t need to buy expensive paints. So long as they’re acrylic and mat finish paints, you can buy the cheapest you can find. Art shops are a good place to go, but they will stock more expensive brands, so again, try shops like Wilkinson, the Range and Hobby Craft.

The same applies for brushes. For finer detail paints or highlighting you want a medium sized and soft brush. For mass painting or large areas or slapping on paints and sealers like Mod Podge, a large coarse brush is fine. You can usually get sets with a good variety. Same rules apply; you can buy expensive or cheap, the difference is that one you will replace more frequently but that’s perfectly natural for paint brushes.

More on washes later…

Glue & Glue Guns

Mini glue guns are best. You can get them for less than £5 and the glue sticks online, especially eBay, are sold by the 100 for a couple of GBP. You can go a little more up market here if you have the budget – cheap glue guns will tend to dribble  the hot glue between uses unless you turn it off and on again (which takes time to heat up, so I tend to leave them on as I work).

With PVA glue – the price reflects the water content. Expensive means thicker and stronger, cheap means more water but likely quicker to dry and easier to paint on. Again, buy what you can afford, but for the terrain making, you can buy the cheap stuff and no one will ever know! The great thing about PVA glue is that you can thin it down with water (which for the most part, is free).

Foam, XPS & Styrofoam

The crux of this article. Let’s get something straight. In the US & Canada, XPS foam comes in pink or blue colours and is readily available in large quantities. In the UK however, it seems to be nowhere. That is because over here in the UK we call XPS foam, Styrofoam. XPS is the abbreviation for Extruded Polystyrene – it is basically a very strong, durable but craftable foam which does not bend. EPS, which is expanded polystyrene is the stuff that your electrical goods get boxed in, the white stuff which looks like it has been made out of thousands of tiny bubbles.

Styrofoam / XPS is available mostly online through eBay. I tend to use the supplier named Blue Foam, found here. Depending on the thickness and sheet size, you can get a reasonable amount of Styrofoam for less than £20. This is the material I commonly buy and use to create bricks and bases for my terrain buildings.

You could buy from a hardware or DIY store but I’ve yet to find it in an affordable or ready to use format. If you have found it, please let me know!

Foamstock, Card & Paper

Foamstock is just a piece of foam front and backed with paper. It’s used to mount photographs amongst other junior school crafts. Again, you can get it just about anywhere but the cheap stuff is fine to use and available in pound shops!

I use card recycled from postal packaging. When you buy a book from Amazon they usually turn up in a thin but sturdy card envelope. This stuff is strong and durable and ideal for detailing terrain miniatures. I use it for cutting roof tiles / shingles.

Paper. It’s just paper!

Measuring Rules

I tend to buy rulers and squares from Wilkinson’s or the Range. You may need to dig deep in store to find them. For £20 you should be able to get good quality steel rulers etc that will last you years. Not bad for a small initial outlay!

The God that is Mod Podge!

Yep, this stuff is amazing. It’s not just a fancy PVA glue. No. It is terrain divinity. It dries with more toughness and water repellent properties than PVA, because it contains resins which act as a sort of easy to use concrete. No terrain made from foam should be made without it!

The best news is that you can now buy it in UK shops readily. I first bought some online, but recently found it cheaper in the Range. Not even Hobby Craft had it in stock last time I checked!

Making Decent Wash…

You’ll notice a lot of people create their own washes for terrain. A wash is a water-thin paint that is applied liberally to a miniature which, as it dries, recedes into the recesses of the model to create shadows. It’s a miracle product!

The problem for terrain crafting is that you need a lot of it, and frankly it can be expensive (looking at you, GW)! So here’s how to make your own – keep in mind, if you buy these products you’ll be able to make litres of wash and you can modify them for varied results…

What you will need:

  • Artist Ink (black and brown usually)
  • Mat Medium (essentially colourless paint)
  • Water (deionised is best)
  • A bottle container or two
  • A smidge of washing up liquid

Now, there are literally hundreds of tutorials online to show you how to make washes, so I’m not going to repeat them here, I will however share a link to a really helpful guy who knows a bit more about painting than I do, meet Luke!

If you’d like to read on the previous articles, you can find them in the links below:

Tabletop War-Game Terrain & Scenery: Bombastic Buildings and Fantastic Features – Creating your Tabletop Battlefield

TABLETOP WAR-GAME TERRAIN & SCENERY: Part two, the basic steps

Tabletop War-Game Terrain & Scenery Part Three: Putting it all Together

If you’re on Facebook or Twitter you can find us in these links, where we post often, so you’ll get notifications if you follow us:

Twitter @FerrisWrites or @TheCConsortium

Facebook page!

In the next few weeks I’ll be looking at making trenches, futuristic and alien terrain pieces (Mars was requested) and possibly upping my painting game!

If you think this article or related articles have been helpful, or if you want to contribute with some knowledge of your own, get in touch and leave or comment or get hold of us on Twitter or Facebook!

Tabletop War-Game Terrain & Scenery Part Three: Putting it all Together

In the last few weeks I’ve gone over some of the techniques for making battlefield terrain. The focus has been on buildings and structures and this week we’re going to finish that theme off by bringing it all together. I promised some multistory buildings too. Read on to see more of the good stuff and how I achieved the beginnings of some great results!

What am I doing?

I decided to make everything so that it would fit on convenient 15 x 15 cm tiles. This was so that I could orientate the same tiles to create different looking terrain, whether I’m playing Age of Sigmar, AoS Skirmish, Frostgrave or even some Dungeons & Dragons.

Similar tiles can be used to create urban scenery in Warhammer 40,000, which I’ll cover at some point in the future.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

I also upgraded my hot-wire cutter. It was a little more expensive, in the £50-60 region, but the arm doesn’t flex, the wire doesn’t bend and it heats up consistently making its ability to cut through foam much better! Alarmingly, the wire does glow bright orange, which was a little disconcerting at first!

So how did I do, what did I do, and how did I do it? Read on…

A trial run…

I decided to test my formula for creating tabletop scenery with an unsuspecting volunteer. I quickly ran down the basic steps of creating the terrain piece, introduced the volunteer to a hot glue gun and Styrofoam, hefted a tonne of miniature bricks onto the table and allowed that person to run away with their imagination. This is the outcome so far (note, it still needs painting).

 

This slideshow requires JavaScript.

As you can see, it really doesn’t take much to get stuck in and have a go. Once again, there wasn’t a huge amount of planning involved in the creation of this quaint little tower – imagination provided the blueprints and away they went!

The Tile Set Blueprints

OK, so creating as many 15 x 15 cm tiles as required. To make my life easier, I got hold of some 1 cm thick black Styrofoam. It was an eBay purchase and cost me about £16 but may be cheaper in other parts of the world. Why did I buy these? It’s quite difficult to thin down thick Styrofoam on account of the wobbly nature of the hot-wire cutter.

So, not everything needs be to broken or derelict, no, there needs to be more so I’m going to build some complete structures which fit on the 15 cm tiles; watchtowers, tall walls, dead-ends, bell towers, warehouses, pig pens, shambolic defensive positions – you name it!

Because each tile is essentially 6 x 6 inches, I can fit four in a single square foot. Multiply this by four and you’ve got yourself an interchangeable, customisable and modular tabletop terrain system. I’ll go to town on some bigger open plazas with ruined columns etc in the future (to make it easier and give any missile troops a chance).

Footpaths & Plazas

From a design point of view, I’d like to build some footpaths, essentially narrow death traps that must be risked to get to different places on the map.  Here are some images of the test pieces I worked on. It can take time to get it right, so give yourself an open mind when you’re trying out ideas – you won’t put pressure on yourself and get worked up by perceived ‘failures’ at the end of your crafting session.

 

This slideshow requires JavaScript.

The dirt footpaths are 5 x 15 cm. By applying a lot of pressure with some scrunched up tin foil to the centre of the Styrofoam piece, and lighter touches to the outer quarters I was able to create the impression that the path had been used for many years. I cut some 0.5 x 0.5 x 15 slithers of foam and cut them up, weathering and aging them with the foil to look like curb pieces.

In the future when I attempt larger roads, I will use the ‘crazy pathing’ idea and simply trim the pieces down to compensate for the curb. I’ll also impress the foam in places to make it look like carts had been through, wearing down the road over the years.

The roads should be at least 10 cm wide and up to 30 cm long (the extent of my purchased Styrofoam sheets) – they will look good running through the centre of the board, or alongside the boards on bigger battle arenas. Details are important here, so I need to think about how I’m going to decorate the pieces to make them believable.

It sounds easy, but it’s actually very hard to make simple open spaces and retain the feeling of interest and wonder. Because there’s likely no focal point to grab the eye, it needs to have a few extra details to keep the area ‘alive’ and quirky.

I’ve decided on a single gallows with some stakes rammed into the ground to keep people away from ‘justice’ being served…

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

I added some ‘crazy pathing’ for a bit more variety, weathering the whole lot with the tin foil method. To make the pathing stones I cut foam strips 2 x 2 cm then went over the corners, freehand cutting in irregular ways. I then cut the stones from the end of the strips at 0.5 cm, creating odd and mismatched but flat stones. In hindsight, I should have cut these narrow than 0.5 cm, maybe half that again to 0.25 cm.

Texture is also important, so I’ll likely be using some of the rolling pins from Green Stuff World. An example of my trial run with these can be found in the images below…

 

 

This slideshow requires JavaScript.

Ramping It Up!

Finally, I decided to have a go at the multistory building idea.

I wanted to make this bigger, but I also wanted to be able to use different parts of it at different times. To achieve this, I started with 4 tiles to make a jumbo tile and began building a wall which would interconnect. I added a ruined wall around the edges of the jumbo tile, leaving plenty of gaps and debris for cover and interesting features.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

I then started to make a second story of brickwork, which I could lock or lay in place and built this up a few times. Finally, I made a third story set of brickwork, but this time to accommodate half a roof.

The roof in these pieces was made from foam board, which is light and tough. I cut out rows of packing card (the sort of thin card your Amazon books are delivered in). Each row was 2 cm high with a cut  1 cm deep every 1 cm along the row. I then just cut and hacked out pieces to create the impression of roof slates. This was time consuming, but quite rewarding. You can see some of the details in the image below.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

Finally, here’s a series of images showing you how to connect together.

 

This slideshow requires JavaScript.

OK, so its not complete yet (I mean, I did just complete an entire week of a UK LARP event!) So I’ll post some images next week.

That’s it for now, and the end of this miniseries for terrain and scenery. If you’ve learnt anything, or if you have some advice and tips of your own, please leave a message in the comments below.

There will be more on tabletop terrain in the future, but for now, I really want to get these pieces finished and have them lined up for some gaming!

Good luck, and have fun!

Ferris

Part One…

Part Two…

Twitter @FerrisWrites or @TheCConsortium

Facebook page!

TABLETOP WAR-GAME TERRAIN & SCENERY: Part two, the basic steps

Thinking of making your own terrain and scenery for tabletop games? Here’s our take on things, free and easy to use!

Last week we brought you an introduction into making terrain and scenery pieces to your tabletop games like Warhammer Age of Sigmar or Frostgrave. In this article you’ll find a little more detail on the early stages of modelling terrain features, with some images of the pilot projects we have currently underway.

I want to to make it clear that I didn’t plan any of these pieces – no more than just a casual thought and a pencil line went into the design, highlighting the point that planning isn’t everything for small projects like these. It can be fun and highly rewarding if you’re open to learning from the process and as Bob Ross would say, have some happy little accidents.

Our approach should hopefully mean less headaches for you and we hope you will enjoy the fruits of our labour!

Stuff We Used (But can be swapped for similar stuff)

  1. Styrofoam sheets (or polystyrene)
  2. Hot-wire Cutter (optional but very quick and smooth)
  3. Craft Knife (essential)
  4. Rolled / mushed up tin foil (optional)
  5. Hot-Glue gun (or PVA glue if you have more time)
  6. PVA Glue
  7. Mod Podge, matte (Optional but a very good sealer)
  8. Acrylic Paint (Black, Tan, Grey & White)
  9. Grass Flocking, gravel (optional)

Preparing the Base

The Styrofoam sheets were too thick, making the round bases 2 cm high, so I cut them down to 1 cm. This gave twice the number of bases I wanted – a great stockpile for future terrain pieces. I reckon these 1 cm high round bases are still sturdy, more so when we apply the various coats of paint and sealers to them. For bigger projects, I may in the future use MDF board.

However, cutting tall pieces of Styrofoam sheet proved difficult – despite my best efforts to keep the pieces upright,  there was always some flexing which caused a few uneven cuts… check out the damage!

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

I got round this by using some scrunched up foil and rolling / dabbling the foam base with it. This softens edges and adds detail. Be sure to use different parts of the foil so nothing looks uniform – or just get yourself a smooth cutting jig for sheets.

Perfect Bricks Begone!

In the previous article I mentioned that the bricks I cut were too perfect. And probably too big. This time we decided to cut smaller bricks than last time – they look better and if we want to make a curved wall, smaller bricks would leave smaller gaps. If we want to add foundation stones to anything, we could still use the larger bricks in the future.

To begin with, we used our very cheap Ebay purchased hot-wire cutter to make a lot of bricks and some bases out from our Styrofoam sheets. This took a bit of time, but now that there’s a box of ready-to-use bricks, we can focus on building and crafting!

To make life easier, I cut some strips from the sheets of Styrofoam and then simply cut the ends off, 1 cm at a time. With a bit of practice I was pushing 2 strips through the hot wire at a time, creating plenty of bricks in the space of an hour.

With the brick cutting process sorted it’s time to deal with the ‘perfect brick’ problem from the previous project. The best idea the internet had offer was to put those Styrofoam bricks into a tub, throw in some real rocks then seal the lid down tightly and shake for a minute. The result was nicely weathered, pitted and rounded edges on each brick. Perfect!

Preparation

Most of the prep work here is to ensure you can start creating great looking pieces of terrain quickly. If you follow our method, we think you’ll be all set up to get stuck in any time you fancy creating!

  • Cut out many, many 1 x 1 x 2 cm bricks. Don’t worry if they’re slightly out of shape – for ruins or even fresh built walls, a little variety adds some realism to the final product. You can go bigger if you’re after chunky masonry.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

  • Weather the bricks by tossing them into a container with stones as mentioned earlier or you could mush them about a bit with some scrunched up tin foil.
  • Prepare a base – for me a 1 cm thick circular base at about 6 inches diameter (inches because most tabletop war games use inches) was fine. The size is just right for some ruined walls without being a massive piece for the tabletop.
  • Mix paints and glues. We added a healthy dose of black to our Mod Podge, created mixtures of water and PVA and even prepared our flocking for creating moss. Cheap black paint with water will create a very simple and nice shade wash to douse your piece, this will offer depth of detail before you move on to painting it properly.

Now to have a think of what to make: to begin with we marked the base with very light pencil lines. These marked out where the bricks would be placed and glued and kept the bricks to a straight line. If you’re making a curved wall, find something to match the curve you’re after – such as a Pringle tube or a cup and trace around it. It’s probably more important for curved walls to trace the lines in.

So, without further ado, here’s our basic terrain formula. We use this formula to create terrain pieces speedily. Keep in mind that it’s pretty basic, but it should give a good coverage to your materials to enhance their structural strength.

Basic Terrain Formula

Hot glue gun. Glue each brick, one at a time. Give each row a few seconds to cool and harden so you don’t squash previous layers out of line. Build upwards, making sure you alternate the corners and rows – this isn’t just aesthetic, it actually builds a stronger wall!

Water down some PVA, about 60/40 (PVA/Water) and apply it to wherever you want to add gravel. Sprinkle the gravel on and leave it to dry. Drying times will vary. Give it plenty of time as the next layer will mess it up if it isn’t properly dry.

Mod Podge layer comes next. Get it right in the cracks, thin the Mod Podge down a little to get lighter coats and ensure full coverage. You can add a dash of water to the Mod Podge to thin it down. Allow to dry until it darkens all over.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

Water down some cheap black acrylic paint with water, 60/40. Apply it all over! If you’re having trouble getting it into the cracks or its not covering properly you can add a literal drop of washing up liquid. Stir it in, don’t shake it! What you’ve made is essentially a shade wash – the paint will seep into the cracks and impressions, bringing out the detail. Don’t worry if it doesn’t stick to the whole surface, it’s not meant to! Allow to dry.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

Dry brush with successive layers of tans, light browns, greys.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

  • Add any details such as grass, flocking etc.
  • Once you’re happy, give it a nice layer of hard-coat and allow to dry!

That is pretty much the basic formula used to create terrain pieces. It took a few attempts and some rescues in the first 3 pieces I made up, so don’t panic if you jump forward a step or miss a step – you can always go back, and reapply layers again. The important bit is Mod Podge first!

Details, Details, Details…

Weathering Foil

To weather our bricks, we grabbed some stones from outdoors, put them in a tub with a handful of bricks, and shook them about. Alternatively, we also rolled and scrunched up some foil so that it had uneven and sharp edges. Simply foll or dash the foil against the surface of the Styrofoam and you’ll get a stippled patina that looks like weathering.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

Brickwork

When using bricks like this, it pays to get the first layer glued in properly. I lined up the bricks against a light pencil line drawn into the base. This allowed me to keep the brick laying straight, it also allowed me to approach the corners of walls without too much thought: make sure that each corner brick alternates with the row below it. You can see the detail in the images below.

I like to add some random fallen bricks and gaps in the walls to add a bit of life to the ruins… in my head I imagine the story behind them too…

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

Pathing Stones

For pathing stones, I cut some strips of foam 2 x 2 cm and then just cut the ends off about 0.5 cm. Sanding the corners at this point saves doing it for each individual piece later – a nail file or fine sandpaper will do.  I didn’t need a lot of these but I cut more than I required. I think it looks better if the pathing stones are at an angle from the brick work. I traced some guidelines directly onto the foam base to get an idea of where to place them.

Moss (maybe Lichen)

To add moss, mixed PVA with water (75/25) and toss in a load of flocking so there’s a mulch of thin glue and flocking. You can add dashes of colour for a varied effect. With a brush, get a gloop and dab it in the brickwork gaps, hang it from beams etc. When it dries you can always add more. If its thicker, you can make it drip from beams, where, if you’re lucky, it will harden and look like hanging moss. If you’re feeling particularly special, you could add some tiny drops of colour to the dried moss, for flower details.

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

Extras

I’ve had an old sprue of assorted items from the original Mordheim game which contains a chest of gold and other bits and pieces. It must be older than some of our readers. I’ll construct, paint and seal these separately, but you can always add them into the formula above to make them look part of (and more involved in) the scenery.

There are a tonne of suppliers online for bits and pieces to add to scenery. Even the expensive GW products come with optional extras on the plastic sprues which you can scatter about for extra detail – weapons, shields, skulls etc. However, if you want to get some extra bits and pieces, I’ve included a link for your perusal later on.

Try some Mantic Terrain Crates

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

What I’ve Learned this Week

  1. It’s been fun!
  2. I realised that the number of happy accidents are more common than first expected. This element of randomness and chaosivity (to quote a theatrical costumer I know) has given me ideas which I’m going to try and emulate – randomness in a brick wall makes things more interesting than a homogeneous perfection.
  3. You can always go back and change something if you make a mistake, cut out bits you don’t like and just make it look like a natural part of the decay. The process we’ve given is very forgiving!

Coming Next…

So I think I’ve mastered the basics of ruined buildings. Now, I’m going to be setting my sights a little higher by building a larger more detailed ruin. I admit, that not putting much planning into this project is going to be a challenge, but also fun and rewarding.

A simple two story, battle ready building with details is going to look cool – here’s a sneak peak!

wargame wargames terrain building modelling warhammer 40K age of sigmar AOS miniatures frostgrave

I’m away over the next bank holiday weekend, so I’ll get some steam rolling to bring you even more advice and tips on creating battle field terrain soon.

Good luck, and have fun!

Ferris

Part One…

Part Three…

Twitter @FerrisWrites or @TheCConsortium

Facebook page!

 

Martial Art – The Card Game: Simplicity and Complexity in Equal Measure, here’s why…

Martial Art and it’s expansion, Battlefields is a two person card game from Spider-Goat Games. Set in Feudal Japan, you play as warlords vying for control of different regions.

The game is simple to learn, and the more you play, the more you realise that it is ultimately a game beyond measure. But I’ll get to that soon, first, let’s look at the game from the players perspective:

Setting Up the Game

It’s super quick and very simple. You start by separating the deck into the lands cards (the nice sea image), the battle deck (the black bird image) and finally two supply cards and the legend cards. The table space should look like this (only the cards in your hand are to be kept to yourself!)

martial art Japan card game war game feudal Japanese battlefield spider-goat games

Each player takes a supply card and then draws four battle cards. With more players (requiring another set of cards completely) the setup is only fractionally more complex, drawing two land cards but only looking at the special rules for the second.

Playing the Game

Simple really, you draw the top card from the lands deck and place it face up. This will show you the region the warlords are trying to capture. Some of the cards have a special text, which gives the locations and lands a feel for the hardship of the battle in a narrative way, such as Kanbara which is covered in snow – the player with the highest strength card must discard a card… its taken it’s toll to win this battle, on account of all the freezing weather.

Each player then commits a single battle card, face-down to the battlefield. When they are happy with their choice, the cards are revealed and the special rules (if any) are resolved. Each card has a strength rating which normally determines the winner.

Normally…

However, some cards can be played during the battle to weaken your opponent, bolster your own forces, or kill them before they even arrive. This is where the complexity of the game really comes in: you’ll need a poker face, a strong one, to fool your enemy. You’ll also need to consider how much you want to commit to each battle – sometimes winning isn’t worth the cost, as we found out. It is a strategy in itself to decide if the prize is even worth fighting for. But fear not, you will always have the Supplies card in your hand, which has a power rating of 0 and you can never discard it. Instead, it allows you to draw an extra card that turn.

Once the battle is resolved, the winner takes the land card to keep score, and each player then picks an extra battle card from the top of the pile.

The first to 12 land points or 3 bridges wins the game.

 

 

Components

The core Martial Art game consists of 60 Battle cards, 12 Land cards and the rules leaflet (which is very well written).

The Battlefields expansion consists of 8 terrain cards, 8 weather cards and 8 war cards, plus another clear and concisely written rules leaflet.

What makes it good?

There are a variety of cards in the battle deck. Some are simply different soldiers or troops with a power rating, whilst others are weaker with special abilities. The battle cards are colour coded, red for damaging, white for supporting and purple for supplies. Generally, there are only 2 of each card type, so if you happen to draw both you know you’ve denied your enemy.

Some of the battle cards are simple yet amazingly fun and amusing to play: got a card hand of a lot of chaff? Well hope for the peasant battle card, which gains strength for each card in your hand… literally a horde of angry peasants come to fight for your warlord and they’re unlikely to be swept aside!

The supply cards, those troops and specialist forces with the white border, really mix up the focus of the battle. Some, like the archer, will provide a strength bonus if you’re original battle card was strength 7 or lower. The Scout allows you to look at an enemies card hand BEFORE the battle takes place so you can see what they may play, or the Geisha, who presumably disarms your warlord or warriors enough to distract them, removing any special rules text from the card your opponent played.

The land cards are not single point lands, rather they can come with heavy rewards, such as a land card worth 4 points, such as Kyoto. In such battles, often the supply cards can fall fast to try and lever the battle in your warlords favour.

The fact that 12 land points or 3 bridge points can win the game means an opponent can lose sight of the bridges score, allowing you to sneak a victory by capturing all the choke points across feudal Japan.

And it gets better – with the recent Kickstarter completing, the second printing of Martial Art is now complete, with an expansion simply called Battlefields. The Battlefields expansion brings persistent weather effects in the form of land cards, and terrain cards to better exploit your opponent or bolster your own forces. Some of the support cards have also been modified to emphasize the war off-pitch, such as Geisha influences and other nefarious and cunning medieval tactics.

Why did I back this on Kickstarter?

The art. Originally I saw the cards and was entranced by the artwork, which is all taken from historical documents. There’s nothing more atmospheric to a gamer set in feudal Japan than the actual artwork of the time. Colourful, beautiful and utterly alluring, you could spend a fine moment appreciating the detail and energy each picture offers.

That aside, I wanted a game which was quick to play, easy to transport and simple enough for even a novice gamer to pick up and play. Martial Art does this. It took us minutes to understand the concept of the game, and it cost us in headaches and frustration when we realised, one at a time, that we had just played the wrong card, or failed to exploit a weakness.

red and black temple surrounded by trees photo

All that aside, the price tag was good too. To buy the game now, direct from Spider-Goat Games will cost you $22 for both the core and expansion combined (or more if bought separately). I think this is worth it, for a game you can pick up and play in a coffee break with your elderly grandma or novice player.

Can you stretch to get two of each? I think it’s worth it. For a card game it might seem as little expensive, but for a 4 player game of this sort you’re going to get a lot of use. No doubt I’ll update you all at the bottom of this article in a few weeks telling you about the fun times we’re having!

20190216_212321

A nice little side note…

Spider-Goat Games are cool because they have a little blog on their site about their Kickstarter antics, highlighting where they went wrong and what they have learned. For me, this is a great way of touching upon the minds of the gamers because it shows them to be human. We can also all learn from each others mistakes, a concept which we at Creator Consortium are always keen to express.

Extra Points

Martial Art and the Battlefield expansion combine a great game, but even if you can only get the core game, it will keep you going to hours. If you can stretch yourself to get two copies of each, you can battle it out with up to four players. This would make each game last a little longer as each warlord gazes across the table in suspicion. Play some soundtracks from Total War: Shogun or The Last Samurai and you’re at the gates of nerd heaven!

You can buy the card games here.

That’s all from me, let me know what you think.

Did this article help you decide to try it out, or not? We’d love to know!

J.D.Ferris, CC

 

Groove of War 01 – Tournament Writeup.

 

20190215_170620

The minute wargroove released, the community surrounding it sprang up from a quiet fanbase that had watched and participated it in its development for the past two years. Competition is in the game’s DNA, so it was inevitable that a group of amazing players and fans of the game would put together a tournament showcasing the potential for testing the skill of it’s players.

This is where Groove of War came in, the first and most prominent tournament. Players flocked to sign up and within days, 72 players were locked in to make a small bit of history by participating in its inaugural event and what we’re sure will be a long and exciting tournament season.

The group stages were steadily played out over the week, with participants meeting up as and when to complete their games in a fairly adjudicated manner by tournament organisers. It was here where the real meat of the work began; figuring out the perfect format to provide engaging and watchable games. One massive advantage in a turn-based game like Wargroove is that there is no latency to worry about, so players never have to fret about losing to technical limitations.

Many lessons were learned in the matches preceding the finals in regards to commander balancing, map balancing and turn times. It was found out that stalemates can cause the games to drag out somewhat without timers, so a large discussion is still ongoing to determine the best solution to bring these times down to a more viewer and competitor-friendly format, also the commanders Nuru and Tenri were soon banned from future games having been deemed overpowered.

The grand final was decided between Ash (Ash_IRE on twitch) and Red-Halo, who fought all the way through their brackets to reach the top spots over the week; no small feat considering the wealth of experience from a number of competitive Advance Wars players participating.

Game one: the map was Ban Ban Beach and Ash took an early lead with a heavy Trebuchet focused build; gaining naval superiority early on and pushing right down the coast to stamp out any hope of Red rallying and threatening the seas again. They continued to slog it out in the field, but the game was over by turn 11 when Red Halo conceded, just as he was falling behind in economy.

20190215_165553

Game two: the map was Rumbling Range and Red Halo clawed one back here with an early confrontation down in the bottom right hand corner. It’s a larger map, so the wagons were out in full force, causing Ash to go for major blocking plays to try and deny Red Halo an air factory, but it was all for naught as Ash had clearly overplayed his hand, seeing Red march a lumbering column of pikemen down the right side of the map, successfully blocking Ash’s commander in. Ash valiantly fought on, but conceded on turn 12 when Red’s dragon bore down.

20190215_165910.jpg

Game three: We returned to Ban Ban Beach which saw both players try to gain naval superiority early; Red had clearly learned from the last game and held his own in the seas til the end. An early rush into the middle island gained Ash a crucial economic advantage, Red had split his forces and it took him a few turns to gain footing on the important choke point, while Ash built up his core in the centre. The game seemed very close until Red conceded on turn 8, which left both myself and his opponent in surprise. It could have turned on a penny, but with that win, Ash took the set and was crowned Champion.

20190215_165715

It is truly exciting to follow the organisers and now veterans of the game’s competitive scene as they forge a new standard for how this game will be played into the future. Wargroove is an amazingly fun game; this event just shows how games like this can bring people together. This first tournament, while suffering its share of teething pains, was an important first step and an exciting look into what a determined group of people with a love for strategy gaming can do.

Congrats to Ash, on winning!

IMG-20190214-WA0000

Link to tournament hub:

https://smash.gg/tournament/groove-of-war-01/details

Link to Ash’s Twitch:

https://twitch.tv/ash_ire

Finals VOD: