Tag Archives: single session game

How to Write Single Session Adventures for RPGs (with examples)

Whether you’re new to RPGs like D&D or you just want a fresh perspective as a veteran, we’ve got some suggestions to creating a single session adventure in a couple of hours (which, over a week isn’t that long at all when you think about it).

Writing a whole campaign for table top role-play games like Dungeons & Dragons can be daunting, especially if you’re new to the role of games master (GM) or dungeon master (DM). It doesn’t need to be difficult, which is why I’m setting out how to write a single session adventure and how make it a worthy story!

Definition

A single session adventure takes place for a single gaming session – usually around 3 hours or an evening of game play. It is designed to resolve itself by player interaction at the end of the session, allowing the players to move their characters on. It is a great way to introduce yourself as a new GM to the game because the effort involved is minimal compared to writing a full campaign. That said, extra credit for proper design such as maps and non-playing characters really helps!

Single session adventures need to be concise, so some of the work the GM has to undertake can be a bit more intense: the game needs to start succinctly, the players need to be hooked in right from the start and the game needs to build up to the end smoothly.

I’m going to be running with an adventure example so you can see how it builds up. If you’re lucky I’ll throw in some diagrams to explain what I’m talking about.

Note: I’m not writing this with any game system in mind, although I’ll use generic fantasy elements like those found in D&D. The advice and technique should apply to just about any setting or game.

First Step: The Facts

Identify what the facts are in your adventure – this is the most creative part of the design stage because what you’re doing is setting the plot. The players don’t need to know these facts – it is their job to find the clues and put the pieces of the puzzle together much like a murder mystery show. The clues culminate into the facts and then there is a resolution, in games like Dungeons & Dragons this is normally the second to last encounter: facing the enemy.

Look on the facts of your adventure like the synopsis of a story or a film. It needs to be only be a line or two at most.

Example fact: A Hag is living near a village and has sleep-charmed one or more of the villagers to kidnap young children and take them to her grotto where she devours them or uses them in dark rituals to proliferate her coven. Travellers have also gone missing in the night, leaving all of their belongings behind in the small village inn.

From this simple factual synopsis, we have the antagonist of our story, the method and locations of their actions and finally a reason as to why – creating her own coven of hangs or witches.

Second Step: The Clues & Encounters

A single session adventure should have no more than 3-4 key encounters where the players are able to discover clues. Clues are simple bits of information that, when combined with other clues point the finger or give a direction for the players to investigate further, leading to the showdown encounter which is the resolution. Clues do not have to be combat engagements – your players will be playing different characters with different skills and abilities and you are going to want to provide something for everyone in some of your encounters. Each clue should involve a different style of play for accommodate skills and abilities. This is a story, not a series of fights.

Here’s a diagram showing ways you can organise your clues to make the adventure coherent to you and your players. It is not a comprehensive diagram, but covers the basics which should be more than enough for your single session adventure:

clues for resolutions

Route 1 is linear and fair for first time players. Route 2 starts with the first clue, requiring at least clue two or three to be discovered before heading to the final resolution. Route 3 implies that any clue may lead to the end resolution. Personally, Route 2 is my chosen style as it gives the players a natural feel for the progression of the plot and doesn’t lead right to the resolution after a single clue.

Examples clue encounters

I’ve picked four clues which the players may encounter.

The first clue is that a child vanished in the night from the family’s log cabin. The players can investigate the cabin and realise that there are no signs of forced entry, and under questioning the parents, the bar to the front door was still in place in the morning. Rogue like characters, or trap masters will enjoy setting up their own traps to see where the thief comes from, or analysing the events, possibly suspecting the parents (which is true, but the parents are not aware of their actions).

The second clue is that the elders of the village have been having dreams where they have taken up their young ones and carried them through the forest in the dead of night, to a stone altar where a beautiful woman waits in a strange scant clothing, a tall horned figure lingers in her shadow, never quite realised clearly. Stone altars, strange large creatures and witch-like individuals should inspire the lore masters and religious or cult focused characters.

The third clue involves tracking bare footprints that lead from the village into the forest. Outdoor characters and hunters / trackers will enjoy finding clues such as broken branches or torn clothing (matching the villagers nightwear). Nature characters such as druids will likely notice that the fauna of the forest is very quiet, and that there is evidence of corruption in the flora: leaves are slightly yellowed, new growth is not as vibrant or strong.

The fourth clue is optional, as the players may not try to set up a watch and see if another child or traveller goes missing. This clue / encounter should lead the party into the thick of the forest where the hag will be awaiting her sacrifice. The players will likely forcibly engage the hag, who will make her escape and let the horned figure do her fighting. Tracking the hag from here will lead to the final resolution.

If you feel the party is going too fast, you can include some other encounters as red herrings – bandits camped nearby the main road, wandering monsters which, once dealt with, turn out not to be the culprit!

You should write short introduction paragraphs for each area which gives the details the players need to start investigating. Use the clues you have already written to help you with this. My example is attached to the first clue – clues two and three can probably fit into the map of the village we’ve already given to the players.

“The abandoned cabin sits in shadow, empty of life. The door has been flung open, the bar that held it shut discarded on the floor. From the outside, the various windows have remained closed, firmly held shut by their wooden bars. Inside is cold, hidden away from sunlight and without a fire to keep the house dry. The three rooms are separated by door frames covered in heavy fabrics. The beds are disturbed.”

From this description, your players will want to begin their investigation of the various rooms, asking you questions and poking around for more clues. In this instance, it is clear that the kidnapper did not force their way in, suggesting there is another way into the cabin (which there is not). After a thorough search the players will probably conclude that the kidnapper came from inside the house and may suspect the family – which is another intense encounter which can develop from the clue.

Third Step: Draw the Players In

This is often referred to in RPGs as the plot hook – the device you use to draw the players in and make them want to participate in the adventure. For longer games that last several sessions you can play on plot hooks by enticing players one at a time, but in single sessions you can’t afford to spend the time tailoring the hook for each character.

This is usually the last step for me, as don’t often use personal character hooks (my players are pretty good at that themselves). Arguably this step could be the first or last for many GMs – it’s all down to how you feel about it.

Start the game by asking their characters why they are on the road or why they may be in the village. Take no more than 5 minutes to round this information up. If you have completely new players, you’ll want to do this before the gaming session.

You’ll find that some players are quite good at giving you a little bit of character plot themselves – likely they will provide you some of their own motivation.

Fourth Step: Extra Credits

Maps will be essential to the players immersion for a single session game. Keep them simple: a map of the village will suffice as a centerpiece for the gaming table or space. Make it larger than it needs to be so the players can add to it as they explore or learn about points of interest from the locals – particularly the outdoor type characters, your Rangers, Druids, Hunter etc.

20181113_194321.jpg

Have a dungeon, by all means, but keep it small, maybe 4-6 areas in said dungeon at most. Again, add elements that will give each class or character type something to play with to utilise their abilities such as traps, moral obligations, conundrums, and obviously monsters and bad-guys.

Have a two tailed ending. This is where the clues may allow for different approaches to affect the resolution of the adventure. This could be helping one faction over the other, using a faction to thwart the other or toppling both factions at once. In order for this to happen, consider two or more factions where one is a definite enemy, and the others as possible enemies.

In our current example, one of the townsfolk may have control of the hag, perhaps they hold a fetish which stop the hag from killing them, and so they use the hag for their own agenda, perhaps they suffered at the hands of the villagers years ago and now have an avenue for their revenge. You’ll need to edit your primary fact from your first step.

Fifth Step: Running the Game, Pacing and Rhythm

You should start the gaming session from this point and describe the setting to them from the outset. Leave no room for them to be in different places or occupied with other events unless you can trust the players to come together quickly. I’ve including an example opening description, feel free to use it as a template.

‘Winter in the northern reaches comes sharply this time of year and is unforgiving to the lost and weary. You have been travelling through dark forests for several days. Seeing the first village in what seems like months, you happily head to the warm glow of fires. The village is quiet as occasional snowflakes fall silently. Well wrapped stragglers hurry indoors, some clutching babies close to their chests or dragging resisting children indoors. A single guard approaches holding a torch high to see you all clearly in the growing darkness. She carries a well service sword on her hip. “We don’t see travellers much here – we’re shunned,” she points to a large, scruffy two-story building in the centre of the village, ‘You’ll find rest there, but beware, people have gone missing in the night, locals and travellers alike. If it wasn’t for the coming blizzard, I’d tell you to keep walking.” She nods curtly and continues her patrol.’

In this opening, we set the scene: winter and cold, the characters should be seeking shelter. We give them a location, the village. Being dark, children and being called in, which seems normal at first. The guard, although taciturn doesn’t provide the mission as such, but she does lay the ground work, suggesting the village is not a highly regarded by outsiders and that people go missing. Finally, the players are told a blizzard is coming, so they will likely want to seek shelter and stay a while. Once the players are at the Inn, they can begin questioning the suspicious and untrusting locals, which is an encounter in itself and helps you set up the clues.

So, it is a bit cliché, but this is a working example which I hope gives you an idea of how to draw the players in without making it seem forced. Nothing kills the immersion that keeping your players rigidly in the story, you need them to feel like they want to stay and investigate.

So far, we have the clues, encounters and the plot hook to get the players drawn in. You’ve already got the meat of the adventure set out, now you need to add the garnishes and side orders.

And the last bit…

Keeping the flow of the game is vital for single session adventures. More than ever the party must not dawdle about, wondering where to go next – if they do, they’re eating into the valuable session time and need to get moving. My simple advice here is to keep the players active. If they don’t seem to be doing anything, for example in the evening of the first night at the Inn, then get them to commit to sleep or carry out an action.

If the players are stumped and are not sure what to do next, bring an encounter to them, but make them work for it – don’t spoon feed them! If the following morning they are sat outside wondering where to start, add a small encounter where another child has gone missing: a mother’s shriek. If they still don’t investigate, the villagers gather around the house and begin weeping – another child is missing and then they active ask the characters to help them investigate, which should lead them to the first clue.

There you have it –  a single session game planned out and underway in a couple of hours of work. If, like me, you get the odd 10 minutes here or there, jot down your ideas, add to them, let them grow.

If you give yourself a finite number of key encounters, the rest pretty much writes itself and you’ll be steaming ahead with tonnes of possible ideas, just waiting to be played!

That’s all for today!

We’ve been working hard on NaNoWriMo, Pulp RPG, adventures modules, proofing, editing and brainstorm, all whilst holding down full-time jobs. We’re getting there 😉

J.D Ferris, CC